ResinLab EP11HT Epoxy Adhesive Part A Gray 5 gal Pail

Part number: EP11HT GRAY A PL
ResinLab EP11HT Epoxy Adhesive Part A Gray 5 gal Pail

Please contact your Ellsworth Customer Service Representative to confirm availability and delivery time.

Call Us

Call Us
Contact customer service at 888-458-0554.

Email Us

Email Us
Email our quotes team.

ResinLab EP11HT Gray is a two component, room temperature and heat curing, filled epoxy that is used for bonding plastics and metal. It is semi-rigid, thixotropic, non-sagging, and resistant to cryogenic temperatures, impact, vibration, salt solutions, and water. Part A, 5 gal Pail.

ResinLab EP11HT Gray is a two component, room temperature and heat curing, filled epoxy that is used for bonding plastics and metal. It is semi-rigid, thixotropic, non-sagging, and resistant to cryogenic temperatures, impact, vibration, salt solutions, and water. Part A, 5 gal Pail.
Typical Use: Ideal for bonding metals and plastics. Non-sag paste for large gap fill or vertical surfaces.
Chemical Composition: Epoxy
Color: Gray
Components: 2 part
Cure System: Room Temperature/Heat
Cure Time: 24 to 48h @ room temperature; 2h @ 65 °C; 20min @ 100 °C
Dielectric Strength: 410 V/mil
Elongation: 2.8%
Flash Point: >93 °C
Hardness: 80 D
Mix Ratio: 1:1 by volume; 1:1 by weight
Service Temperature: -40 to 150 °C
Shear Strength: 2,300
Specific Gravity: Part A: 1.26; Part B: 1.25; Mixed: 1.25
Tensile Strength: 5,500 psi
Thermal Conductivity: 0.27 W/mK
Viscosity: Part A: 329,000; Part B: 235,000; Mixed: 300,000 (estimate)
Volume Resistivity: 6.18 x 10^15 ohm-cm @ 20 °C

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.