ResinLab EP750 Epoxy Adhesive Black 50 mL Cartridge

Part number: EP750 BLACK 50ML
ResinLab EP750 Epoxy Adhesive Black 50 mL Cartridge

For current pricing and to place an order please contact your Ellsworth Customer Service Representative.

Call Us

Call Us
Contact customer service at 888-458-0554.

Email Us

Email Us
Email our quotes team.

ResinLab EP750 Black is a two component, room temperature or heat curing, unfilled, epoxy structural adhesive that is used for bonding with most materials and filling voids. It is semi-rigid, free flowing, and has good wetting properties. It is resistant to bases, acids, water, and most organic solvents. 50 mL Cartridge.

ResinLab EP750 Black is a two component, room temperature or heat curing, unfilled, epoxy structural adhesive that is used for bonding with most materials and filling voids. It is semi-rigid, free flowing, and has good wetting properties. It is resistant to bases, acids, water, and most organic solvents. 50 mL Cartridge.
Typical Use: This product has good wetting and adhesion to most surfaces. This product has a free flowing viscosity. It has very good resistance to water, acids and bases and most organic solvents.
Chemical Composition: Part A: Epoxy resin; Part B: Polyamide blend
Color: Black
Components: 2 part
Cure System: Heat
Cure Time: 24 to 72h @ 25 °C; 15m @ 100 °C; 1h @ 65 °C
Dielectric Strength: 410 V/mil
Elongation: 5% to 7%
Flash Point: >93.3 °C
Hardness: 65 to 80 D
Key Specifications: Code of Federal Regulations Title 21 175.105 (Adhesives) and 175.300 (Resinous and polymeric coatings).
Mix Ratio: 1:1 by volume
Service Temperature: -40 to 150 °C
Shear Strength: 1,550 to 2,500
Specific Gravity: Mixed: 1.03 to 1.07
Tensile Strength: 7,500 psi
Viscosity: Mixed: 14,500 to 15,000
Volume Resistivity: 8.3 x 10^14 ohm-cm
Working Time: 45 to 60min

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.