Dymax Multi-Cure 9-911-REV-B UV Curing Adhesive Light Yellow 10 mL MR Syringe

Part number: 9-911-REV-B 10ML MR SYRINGE
Dymax Multi-Cure 9-911-REV-B UV Curing Adhesive Light Yellow 10 mL MR Syringe

Please contact your Ellsworth Customer Service Representative to confirm availability and delivery time.

Call Us

Call Us
Contact customer service at 888-458-0554.

Email Us

Email Us
Email our quotes team.

Dymax Multi-Cure 9-911-REV-B Wire Tacking Adhesives is a one component, UV light and heat curing, acrylated urethane that is used for tacking repair wires, PCB repairs, and bonding jumper wires on print circuit boards. It offers high strength bonds, high viscosity, and solvent resistance. 10 mL MR Syringe.

<p>Dymax Multi-Cure 9-911-REV-B Wire Tacking Adhesives is a one component, UV light and heat curing, acrylated urethane that is used for tacking repair wires, PCB repairs, and bonding jumper wires on print circuit boards. It offers high strength bonds, high viscosity, and solvent resistance. 10 mL MR Syringe.</p>
Typical Use: Used for wire tacking, bonding jumper wires, and PCB repair.
Brand: Multi-Cure
Chemical Composition: Acrylated urethane
Color: Light Yellow
Components: 1 part
Cure System: UV
Cure Time: Actual cure time typically is 3 to 5 times fixture time.
Dielectric Strength: 1,600 V/mil
Elongation: 30% @ break
Flash Point: 101 °C
Hardness: 80 D
Service Temperature: -50 to 150 °C
Tensile Strength: 3,500 psi @ break
Viscosity: 25,000
Volume Resistivity: 80 x 10^12 ohm-cm

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.