Print
Email
Part number: E 6203 HI TEMP 1LB KIT
Manufacturer SKU: 119812
Please contact your Ellsworth Customer Service Representative to confirm availability and delivery time.
ELANTAS PDG Epoxylite® E 6203 is a two component, epoxy system that is used for potting and sealing electrical and electronic components that require resistance to high temperatures. It is heat curing, low outgassing, and is resistant to acids, alkalis, and solvents. It consists of a liquid resin and powder hardener. 1 lb Kit.
| Typical Use: | Used for potting and sealing electrical and electronics components that require resistance to high temperatures. |
| Brand: | Epoxylite |
| Components: | 2 part |
| Cure System: | Heat |
| Cure Time: | 30min @ 204 °C; 1h @ 177 °C; 4h @ 121 °C; 16h @ 93 °C |
| Dielectric Strength: | 560 V/mil |
| Elongation: | <2% |
| Flash Point: | >94 °C |
| Hardness: | 90 D |
| Mix Ratio: | 100:50 by weight |
| Shear Strength: | 2,500 |
| Tensile Strength: | 4,000 psi |
| Volume Resistivity: | >1 x 10^16 ohm-cm |