Dow SYLGARD™ 170 Fast Cure Silicone Encapsulant Part B Off-White 22.6 kg Pail

Part number: 170 FAST CURE B 22.6KG Manufacturer SKU: 3144721
Dow SYLGARD™ 170 Fast Cure Silicone Encapsulant Part B Off-White 22.6 kg Pail

Please contact your Ellsworth Customer Service Representative to confirm availability and delivery time.

Call Us

Call Us
Contact customer service at 888-458-0554.

Email Us

Email Us
Email our quotes team.

Dow SYLGARD™ 170 Fast Cure Silicone Elastomer is a two component, room temperature and heat curing, encapsulant that is used as a protective coating for electrical applications such as power supplies, transformers, sensors, amplifiers, and connectors. It provides good flowability, moderate thermal conductivity, low viscosity, and flame resistance. 1:1 mix ratio. Part B, 22.6 kg Pail.

<p>Dow SYLGARD™ 170 Fast Cure Silicone Elastomer is a two component, room temperature and heat curing, encapsulant that is used as a protective coating for electrical applications such as power supplies, transformers, sensors, amplifiers, and connectors. It provides good flowability, moderate thermal conductivity, low viscosity, and flame resistance. 1:1 mix ratio. Part B, 22.6 kg Pail.</p>
Typical Use: General potting applications: power supplies, connectors, sensors, industrial controls, transformers, amplifiers, high voltage resistor packs, relays.
Brand: SYLGARD
Color: Off-White
Components: 2 part
Cure System: Room Temperature
Cure Time: 10min @ 25 °C
Dielectric Strength: 14 kV/mm
Flash Point: >101.1 °C
Hardness: 45 A
Key Specifications: UL 94 V-0
Mix Ratio: 1:1 by volume; 1:1 by weight
Service Temperature: -45 to 200 °C
Specific Gravity: Part B: 1.33 @ 25 °C; Mixed: 1.38
Thermal Conductivity: 0.4 W/mK
Viscosity: Part B: 2,500; Mixed: 2,850
Volume Resistivity: 2.4 x 10^15 ohm-cm
Working Time: 4min @ room temperature

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.